Showing all 35 results
RIDGID Diagnostic and Locating equipment covers two jobs: seeing inside a pipe and finding what’s buried underground. This category carries the full RIDGID SeeSnake inspection camera lineup and the SeekTech locator and transmitter lineup, everything needed to inspect a line and trace it from the surface. Some contractors search for a ridgid locator or search for the cameras as ridgid camera snake or ridgid see snake.
The SeeSnake line runs from compact handheld units like the micro CA-25 up through full reel systems like the SeeSnake Standard and Compact M40, built for a full day of commercial and municipal inspection work. TruSense technology on the newer Standard and Mini Pro systems reads cable tension and camera position in real time, flagging when the head snags or the cable binds before it becomes a stuck camera. CS6x Versa and CSx Via monitors add Wi-Fi recording and mobile connectivity for documenting a pipe condition on site and sharing it with a client the same day.
The SeeSnake Standard reels run up to 325 ft of push cable, sized for long lateral lines and larger diameter municipal work. The Mini and MicroReel systems trade some reach for a smaller footprint, better suited to residential and light commercial lines where a full-size reel wouldn’t fit through the access point. The microDrain APX and NANOreel go smaller still, built for the tightest lines a technician needs to inspect without pulling a fixture.
The SeekTech SR-20 reads a buried line signal from every angle at once instead of requiring the operator to rotate the unit, and the NaviTrack Scout adds sonde and camera-head locating to that same signal reading approach. ST-305 and ST-510 transmitters supply the active signal these locators trace, at 5 watt and 10 watt output respectively, for jobs that need an induced signal rather than a passive read on an already energized line. The higher-output ST-510 pushes signal further on longer or more heavily loaded lines, where the ST-305 is enough for shorter, more typical utility traces.
A camera confirms what’s inside a pipe: a blockage, a crack, root intrusion, a misaligned joint. A locator confirms where a line or a camera head sits relative to the surface. Most inspection jobs eventually need both, a camera to diagnose the problem and a locator to mark the exact spot to dig or repair. Many crews standardize on one SeeSnake system and one SeekTech locator that work together rather than mixing brands, since compatibility between camera sondes and locators is built in.
A SeeSnake camera shows the inside condition of a pipe. A SeekTech locator finds the position of a buried line or a camera head from the surface. They serve different steps in the same inspection process.
It reads cable tension and camera head position in real time, alerting the operator to snags or binding before the camera gets stuck.
Yes. The NaviTrack Scout and compatible SeekTech locators can find sondes built into SeeSnake camera heads in addition to tracing buried utility lines.
The ST-305 covers most standard utility traces at 5 watts. The ST-510 steps up to 10 watts for longer runs or lines that need a stronger signal to trace reliably.
Yes. RIDGID is the brand name, and ridgid locator and rigid locator are common ways the search gets typed for the SeekTech lineup.
Yes. Both are common ways contractors search for the RIDGID SeeSnake inspection camera line.
Browse the full RIDGID Pressing Tools, RIDGID Drain Cleaning Equipment, and RIDGID Wrenches categories for the rest of the RIDGID lineup at J.M. McKinney Co. Order genuine RIDGID diagnostic and locating equipment with in-stock availability and fast shipping.
